Byron Patio Contractor
Concrete Patios in Byron
Built for the long sit.
Backyard, side-yard, and wraparound concrete patios across Byron and Salem Glen. We build for the long sit: proper fall away from the house, control joints planned to your sightlines, broom or stamped finish, integral color or surface stain. No floating slabs that move in March.
Free Site Visit
Get a free site visit.
Written quote within a few days. No pressure, no upsell. The owner answers the phone.
What Every Pour Includes
What goes under a Byron patio first.
01
Layout & Fall
A patio is a slab that has to look right.
We lay out the slab on the ground with paint and string before we excavate, so the joints land where they should, not crossing the grill, not splitting the table. Quarter-inch per foot fall away from the house, every time. Water never sits on our patios.
02
Substrate
Four inches of compacted Class 5, every patio.
Patios crack because the base settles, not because the concrete is weak. We strip the topsoil, compact in lifts, set grade with a laser, and pour on a base that will not move. Byron new-build backfill gets extra compaction time. Skipping prep is how patios end up tipped.
03
Finish & Color
Broom, stamped, exposed, or stained.
Light or heavy broom for grip, stamped slate or ashlar for the upgrade, exposed-aggregate for texture, integral color or acid stain for warmth. We do the integral-color sample mix on a board so you see the cured color before the truck rolls. No “trust us” finishes.
Recent Pours
Pours we’re proud to sign.
Questions We Get
Byron homeowners ask us.
How thick is a residential patio slab in Byron?
Four inches is the residential standard for a patio that holds furniture, a grill, and foot traffic. If you are planning a hot tub or a permanent outdoor kitchen with a stone facade, we step up to five or six inches under that footprint and tie it into the rest of the slab with steel.
Will a concrete patio crack?
Every concrete slab cracks. The job of the contractor is to decide where. We saw-cut control joints within twelve hours so the cracking happens inside the joint where you cannot see it. The slabs that crack visibly are the ones where someone skipped joints to “save money.”
Can you match my house with stamped or stained concrete?
Yes. Stamped slate, ashlar, flagstone, and cobble patterns; integral colors mixed to match siding or trim; acid stains for a marbled finish. We pour a sample board the week before the job so the color is locked in before the truck arrives.
How long does a patio take to install?
Most residential Byron patios are a three-day job: day one excavate and form, day two pour and finish, day three pull forms and saw-cut. You stay off it for seven days. Hot tub or kitchen patios run longer because of the deeper slab and the rough-in.
Do you handle drainage if my yard slopes toward the house?
Yes. Byron lots back to retention ponds and ravines, and we see plenty of yards where the natural fall runs toward the foundation. We grade the patio with the slope, set the slab to send water away from the house, and pipe in a French drain at the high side if the lot needs it.
Can you pour a patio that will hold a hot tub?
Yes, and it is worth telling us up front, because a filled hot tub with people in it is thousands of pounds concentrated on a small footprint. A standard four-inch patio slab is not built for that. We step the thickness up to five or six inches under the tub, tie extra steel through that zone, and make sure the base beneath it is compacted solid so the slab does not settle unevenly under the load. Getting that right before the pour is far cheaper than trying to fix a sinking tub later.
Should I get a broom finish or a stamped patio in Byron?
Both work here; it comes down to look and budget. A broom finish is the most durable and lowest-maintenance choice and gives good grip on a Minnesota patio that ices over. Stamped concrete costs more and needs a sealer refreshed every few years, but it gives you the slate, flagstone or cobble look tied right into the slab. We will bring cured samples of both, show you the difference in your own yard, and price each on its own line so you can decide with the numbers in front of you.
Service Area
Serving Byron, MN and Olmsted County.
Patios In Byron
A patio is where the drainage shows.
A patio sits right up against your house, and that is exactly why drainage decides whether you love it or fight it. The single most common patio failure we see in Byron is a slab that was poured flat or, worse, pitched back toward the foundation. Water then runs off the patio and pools at the house, finds its way into the basement or the slab joint, and in a Minnesota winter that water freezes, expands and lifts the concrete. We pour a quarter-inch of fall per foot away from the house on every patio, no exceptions, so the water leaves the slab and heads out into the yard where it belongs.
Byron is heavy on newer subdivisions, and a lot of these lots back to retention ponds, ravines or gentle grade that already runs toward the home. On those we do not just pitch the slab, we read the whole yard. If the natural fall pushes water at the foundation, we set the patio to carry it sideways and around, and on the tough lots we pipe a French drain in at the high side so the patio is not the only thing holding the water back. Backfill around these new Byron homes is still settling for a year or two, so we recompact under the patio footprint before we build the base.
Where a driveway is about traffic, a patio is about how it looks and where the joints land. We chalk the slab out on the ground before we dig so the control joints fall on your sightlines instead of cutting across the grill or splitting the table. Finish is yours: a soft broom, stamped slate or ashlar, exposed aggregate, or integral color we mix on a sample board so you see the cured shade before the truck rolls. Under all of it sits four inches of compacted Class 5 and half-inch rebar, because a patio that looks beautiful in June and tips in March was never worth the savings. Call us out and we will walk it and write you a free, itemized quote.
The other patio detail that separates a slab you enjoy from one you regret is where the joints land, and it is a decision most homeowners never know was made until they are looking at it every evening. Concrete has to be given somewhere to crack, and on a patio that means saw-cut control joints. Cut them carelessly and a joint runs straight under the dining table or splits the spot where the grill sits, and now you have a line collecting grit right where you look. We paint and string the patio out on the ground before we ever dig, then plan the joints to fall on your sightlines, tucked along the edge of a seating zone or lined up with a step, so the slab still gets its relief cuts but they read as part of the design instead of an accident. That planning costs nothing extra. It is just the difference between a crew that pours patios and one that thinks about how you will actually live on it.
Byron is a short hop west of our Rochester shop, so a patio here is easy for us to schedule and easy to come back and look at down the road. A patio sits in the hardest spot on a property for concrete, out in the open against the foundation, so the two things that matter most are the fall that carries water away from the house and a base that does not let the slab heave. We get both right before we pour. The visit is free, the quote is itemized, and Pedro is the one who walks the yard, pours it, and stands behind it. Call (507) 735-8820 or reach us through the contact page.
Ready to Pour
Let’s build something that lasts.
On-site visit’s free. Every cost spelled out before you commit. Eight southern-Minnesota counties. Send a photo of the back yard and we will tell you what we see.